| Author |
 Topic  |
|
|
unifox
Starting Member
46 Posts |
 Posted - 28 April 2002 : 18:03:47
|
how can i upload the forum on brinkster....?
|
|
|
crash
Advanced Member
Netherlands
2064 Posts |
Posted - 28 April 2002 : 18:07:24
|
first, get the Brinkster files from Snitz Exchange
then register an account at Brinkster and once you have it, upload the Brinkster files after you have uploaded the standard forum files.
Crash's Site | Crash is from 
|
 |
|
|
jmanibusan
Starting Member
14 Posts |
Posted - 03 May 2002 : 20:16:26
|
quote:
first, get the Brinkster files from Snitz Exchange
then register an account at Brinkster and once you have it, upload the Brinkster files after you have uploaded the standard forum files.
Crash's Site | Crash is from
hi, will i have to edit any of the standard forum files before uploading them to brinkster?
tks.
john
|
|
|
|
Nathan
Help Moderator
USA
7664 Posts |
Posted - 03 May 2002 : 21:27:50
|
Just unzip the brinkster files into the files you downloaded here. . . copy over the top of any files you need to. Then setup config.asp and then upload them.
 Nathan Bales
Snitz Exchange | Do's and Dont's |
|
|
|
Developer Dan
Starting Member
1 Posts |
Posted - 05 May 2002 : 18:46:19
|
If you have a general membership at brinkster you have to do major editing. I have been working at it for a week now and can't get it running. First of all, the script time outs must be set at 90 or lower. Also, Brinkster does not allow "on error resume next" statements. Major headache!!!! I have been trying to get around this, but it is difficult when so much of the forum code is dependent upon this. Good luck, you will need it.
|
|
|
|
ruirib
Snitz Forums Admin
Portugal
26364 Posts |
Posted - 05 May 2002 : 19:17:06
|
quote:
If you have a general membership at brinkster you have to do major editing. I have been working at it for a week now and can't get it running. First of all, the script time outs must be set at 90 or lower. Also, Brinkster does not allow "on error resume next" statements. Major headache!!!! I have been trying to get around this, but it is difficult when so much of the forum code is dependent upon this. Good luck, you will need it.
No you don't need to do major editing. If you use Brinkster files from the link Nathan posted in the first reply to this thread, the only thing you'll need to do is edit config.asp. I've installed two different forums in Brinkster free accounts, and in both cases editing config.asp was all I needed.
So, unzip all Snitz files into a folder. Get the Brinkster files and unzip them over the original ones from regular Snitz. Chnage config.asp according to the database so that you have the connection string recomended by Brinkster and upload everything. That will get your forum working without further efforts.
-------------------------------------------------
Installation Guide | Do's and Dont's | MODs |
|
|
|
Mitja
Starting Member
38 Posts |
Posted - 06 May 2002 : 02:14:17
|
Is it possible to use CODNTS on Brinkster? Or any other mail component?
On general membership.
|
|
|
|
Nathan
Help Moderator
USA
7664 Posts |
Posted - 06 May 2002 : 02:28:16
|
CDOSYS, but that is not supported by 3.3.03, it will be supported in 3.4
Nathan Bales
Snitz Exchange | Do's and Dont's |
|
|
|
jmanibusan
Starting Member
14 Posts |
Posted - 06 May 2002 : 04:23:26
|
quote:
Just unzip the brinkster files into the files you downloaded here. . . copy over the top of any files you need to. Then setup config.asp and then upload them.
Nathan Bales
Snitz Exchange | Do's and Dont's
what would i have to edit in the config.asp file & what would i edit to? how did you get your table/cell in the snitz exchange forum to have that gradiant blue look?
john
|
|
|
|
Nathan
Help Moderator
USA
7664 Posts |
Posted - 06 May 2002 : 21:34:24
|
quote:
what would i have to edit in the config.asp file & what would i edit to?
Read the readme.txt
quote:
how did you get your table/cell in the snitz exchange forum to have that gradiant blue look?
Advanced Color Control mod.
Nathan Bales
Snitz Exchange | Do's and Dont's |
|
|
|
rlpendleton
Starting Member
USA
17 Posts |
Posted - 08 May 2002 : 20:26:39
|
| I know that a hacker has been through here and damaged a lot... I tried to download the Brinkster MOD but I kept getting a 404 error. Is there another way of getting the MOD or will it be available again soon? |
|
|
|
ruirib
Snitz Forums Admin
Portugal
26364 Posts |
Posted - 08 May 2002 : 21:49:09
|
quote:
I know that a hacker has been through here and damaged a lot... I tried to download the Brinkster MOD but I kept getting a 404 error. Is there another way of getting the MOD or will it be available again soon?
I have the Brinkster files. I can email them to you. Email me using the email poster to inform me of your email address, or post the email address here if that's OK with you.
-------------------------------------------------
Installation Guide | Do's and Dont's | MODs |
|
|
|
rlpendleton
Starting Member
USA
17 Posts |
Posted - 08 May 2002 : 23:57:46
|
I don't give my email address out that often, but:
shatter_star1@hotmail.com
Thank you for this :) |
|
|
|
Nathan
Help Moderator
USA
7664 Posts |
|
|
hadi
Starting Member
USA
37 Posts |
|
| |
Topic |
|
Topic Locked
