I am trying to write a CD but everytime I try Its getting failed.I lost around 6 CDs and finally I got CD-RW but its stil the same.
Log :
8K24-0230-0105-7K60-5043-87M4-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0
Recorder: <HL-DT-ST DVDRAM GMA-4082N>Version: HQ04 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GMA-4082N>Version: HQ04 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GMA-4082N atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BEVS-60LAT0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GMA-4082N E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
BUFE : 0
Physical memory : 502MB (514096kB)
Free physical memory: 197MB (201988kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.10.2008
CD Image
8:40:03 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
8:40:03 PM #2 Text 0 File Burncd.cpp, Line 3238
HL-DT-ST DVDRAM GMA-4082N
Buffer underrun protection activated
8:40:04 PM #3 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 250021 -> 250019.
8:40:04 PM #4 Text 0 File Burncd.cpp, Line 3568
Turn on Track-At-Once, using CD-R/RW media
8:40:04 PM #5 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 250021 -> 250019.
8:40:04 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 250021 -> 250019.
8:40:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 292
Medium type in the drive: Unknown
Lowest/Highest CLV write speed: 3x/250020x
Recorder min/max supported write speed: 4x/9291020x
8:40:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 250020 ( 55:35.45)
8:40:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
8:40:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: HL-DT-ST DVDRAM GMA-4082N;
CDRW code: 00 97 17 01; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: A3 00 CF, 2: 61 11 01 (LI 97:17.01), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 2C DC, 2: 14 A4 4A, 3: 02 D2 80
8:40:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:40:04 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 250021 (250021) = #250021/55:33.46
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 250019 blocks [E: HL-DT-ST DVDRAM GMA-4082N]
--------------------------------------------------------------
8:40:04 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [E: HL-DT-ST DVDRAM GMA-4082N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 512350208, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 250021 | 250021 | 0x00
250021 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
8:40:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 1. Length: 250021 -> 250019.
8:40:04 PM #15 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
8:40:04 PM #16 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
8:40:04 PM #17 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
8:40:04 PM #18 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
8:40:04 PM #19 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
8:40:04 PM #20 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 10x (1,500 KB/s)
8:40:04 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:40:04 PM #22 Text 0 File MMC.cpp, Line 22530
Set BUFE: Buffer underrun protection -> ON
8:40:04 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 73340800
8:45:49 PM #24 Text 0 File MMC.cpp, Line 17306
<HL-DT-STDVDRAM GMA-4082N> start Close Track #2
8:46:17 PM #25 SPTI -1039 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
Sense Area: 0x71 00 04 00 00 00 00 10 34 14 04 90 09 02
8:46:17 PM #26 CDR -1039 File ThreadedTransferInterface.cpp, Line 1173
Focus or tracking error
E: HL-DT-ST DVDRAM GMA-4082N
8:46:17 PM #27 Text 0 File MMC.cpp, Line 17306
<HL-DT-STDVDRAM GMA-4082N> start Close Track #2
8:46:52 PM #28 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 10x (1,500 KB/s)
8:46:52 PM #29 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:46:54 PM #30 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed
8:46:54 PM #31 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
<