| Author |
 Topic  |
|
|
marckmcgill
Junior Member
Italy
134 Posts |
 Posted - 24 September 2003 : 13:29:30
|
I've successfully (?) added the Active Users mod, but there's something weird: every now and then (apparently when the active users panel gets stuck due to some network/server problem) I find that the Active Users configuration in the admin options section is changed randomly.
I constantly need to reset the values to the desired ones, and it's a pain in the ass. Anyone can guess what's wrong with it? Here's the forum URL, in case you need it:
http://www31.brinkster.com/lamarine/forum/default.asp
Thanks in advance! |
|
|
masterao
Senior Member
Sweden
1678 Posts |
Posted - 24 September 2003 : 15:15:17
|
Is it only the values for AU that resets and none of the other forum values?
At the top of my head, I can only recommend that you recheck the additions you did to config.asp. |
Jan
===========
FR Portal Forums | Active Users 4.0.20 Mod |
Edited by - masterao on 24 September 2003 15:15:34 |
 |
|
|
marckmcgill
Junior Member
Italy
134 Posts |
Posted - 25 September 2003 : 03:36:05
|
Yes, only those. Thanks for answering. I'll check config.asp again, but I'm quite sure I did it right.
No one else experiencing this problem? I have also installed the Avatar mod, by the way. |
|
|
|
masterao
Senior Member
Sweden
1678 Posts |
Posted - 25 September 2003 : 08:25:05
|
I don't remember if anyone have had similar problems, as this sounds like the application variables for AU doesn't fetch their values as they should
How often does the values reset? |
Jan
===========
FR Portal Forums | Active Users 4.0.20 Mod |
|
|
|
marckmcgill
Junior Member
Italy
134 Posts |
Posted - 25 September 2003 : 10:56:25
|
Continuously, yesterday. I didn't have problems today, instead.
Maybe (MAYBE) the problem happens when you're logged in as administrator, and then you login again to access the admin options. You know that there's some difference: for example, you don't see the "lock the board" icon if you don't login twice.
Maybe the trick is to logout after installation and set-up, and then login again normally. You don't have to stay in the "admin options login mode". Maybe. Let's say that everything goes now, we'll hear each other again in case something wrong will pop up in the future. Many thanks for helping!!! |
|
|
|
masterao
Senior Member
Sweden
1678 Posts |
Posted - 25 September 2003 : 12:57:49
|
| If that doesn't work, you could try the following. Configure AU and run Check Installation (setup.asp) after that. That might do the the trick. |
Jan
===========
FR Portal Forums | Active Users 4.0.20 Mod |
|
|
| |
Topic |
|
Topic Locked
