| Author |
 Topic  |
|
|
Crowdog
Starting Member
25 Posts |
 Posted - 29 November 2001 : 15:42:27
|
I have been told that I do not have the most recent version of Snitz running (http://www.sandmountain-nv.org/Snitz/default.asp), but when I hover over the snitz logo, I see that I am at 3.3.03. Can someone confirm what version I am on? If it is not the most recent, are there upgrade instructions anywhere (I have looked, but couldn't find anything)?
Thanks,
Crowdog
|
|
|
Kenno
Average Member
Cambodia
846 Posts |
Posted - 29 November 2001 : 15:46:41
|
3.3.03 is the most current version of Snitz Forum, but you have the international version.
It's good to do the Impossible, But it's no longer call the impossible when it's doable. |
 |
|
|
Rasco
Advanced Member
Germany
3192 Posts |
Posted - 29 November 2001 : 15:49:04
|
You`re using V4 Beta (you could choose your language in the upper right box). This version does show V3.303 when hovering over the graphic, cause this wasn`t changed so far.
V4 and V3.3 are using the same code, except the multilanguage support.
|
|
|
|
Crowdog
Starting Member
25 Posts |
Posted - 29 November 2001 : 15:49:35
|
Should I install the US version?
The only problem I have is assigning Moderators.
Crowdog |
|
|
|
Crowdog
Starting Member
25 Posts |
Posted - 30 November 2001 : 13:53:55
|
I went ahead and downloaded the US version (Snitz Forums 2000 v3.3.03) from Snitz Download page.
I removed all of the files in my "Snitz" directory, and modified config.asp with the correct DB pointers. Everything works, but I am still running the International version. I tried to redo this and came up with the same results.
Can someone tell me what idiotic thing I didn't do? I know it has to be something simple.
Here is my forum: http://www.sandmountain-nv.org/Snitz/default.asp
Thanks,
Crowdog |
|
|
|
Crowdog
Starting Member
25 Posts |
Posted - 06 December 2001 : 00:18:10
|
Alright, I still can't figure this out.
My site is hosted on a friends business server. I was able to upgrade a snitz forum for one of my web sites just fine, but this one doesn't get the new code and I don't understand why.
I can remove the entire Snitz directory, and this thing still works. It must be pointing to some other code, but I have searched and came up empty. If anyone has any ideas, please let me know.
http://www.SandMountain-NV.org/Snitz/default.asp
Crowdog |
|
|
|
Nathan
Help Moderator
USA
7664 Posts |
Posted - 06 December 2001 : 00:26:37
|
Go into the server variables in the admin section, check out the APPL_PHYSICAL_PATH.
This way you can confirm that you are deleting the correct snitz folder.
I dont know, but the server might be cashing them?
Nathan Bales - Romans 15:13
-------------------------------
Test Site | Mod Resource |
|
|
|
Crowdog
Starting Member
25 Posts |
Posted - 07 December 2001 : 14:37:07
|
The server must have had the code cached somewhere. I rebooted the server, and it was all fixed....
Crowdog |
|
|
| |
Topic |
|
Topic Locked
