Poll Mod v2.0.5

Snitz™ Forums 2000
https://forum.snitz.com/forumTopic/Posts/36596?pagenum=1
04 November 2025, 15:15

Topic

Davio
Poll Mod v2.0.5
09 October 2002, 06:36


Poll Mod Version: 2.0.5
Current Author: Davio
Original Author: Slemieux
Last Modified: April 09, 2002
For Snitz Version: 3.4.03

Finally the poll mod is ready for the 3.4 version. This version is a new and upgraded version from the pervious ones. With new features and lots of bug fixes. View the list of changes I have made in the list below. I hope everyone enjoys the new poll mod as much as I enjoyed working on it (yeah right). smile Thanks for your patience.
Ease of Installation (1-Hard, 10-Easy): 4

Downloads: 3.4 Version
Main Link: http://www.snitzbitz.com/mods/details.asp?Version=All&mid=76
Updated Files Only: http://www.snitzbitz.com/mods/details.asp?Version=All&mid=76

Demo: http://www.dsilvera.com/forum/

April 09 Version 2.0.5
- Fixed bug with active polls and admin polls page. Polls that had no votes didn't show up. - Fixed minor bug on topic.asp file. - Fixed bug in UpdateVote() sub, when using different table names. - Updated adctive polls page, so it works the same way as the active topics page. - Added feature on active polls, that shows which poll is for members only.
January 07 Version 2.0.4
- Fixed bug with new feature from previous release. Bug allowed users to vote more than once.
January 04 Version 2.0.3
- Added admin option to enable/disable users to view poll results before they vote. - Fixed bug when admin locked a Category/Forum/Topic the poll will automatically be locked too. Each poll will have to be locked individually.
INSTALLATION/UPGRADE: Please read the READ_ME_FIRST.txt file that is included. It also includes a FAQ section to common questions that you might ask about the mod.
SUPPORT: If you have any problems please post them in the Help: MOD Implementation forum. DO NOT ASK FOR HELP OR POST YOUR ERROR MESSAGES IN THIS TOPIC!!
Poll Mod Add-On! Also check out the Site Poll Mod. It allows you to put your featured forum poll on your website. http://forum.snitz.com/forum/topic.asp?TOPIC_ID=40335<

 

Replies ...

Naveed
09 October 2002, 06:42


cool Davio, I'll test it right away!<
wii
09 October 2002, 14:30


Thanks Davio - I added the code to my Free Asp Hosts forum - works perfectly !!! Great work.<
Coder_1999
09 October 2002, 16:18


Excellent!!! Downloaded. I will get it installed by tomorrow.
Thanks for all the hard work Davio!<
Marlark
09 October 2002, 16:18


Hi Davio

I added the poll code to my site and it seamed to work very good until i noticed that if you have a poll and instead of pressing vote you do a View Results it gets marked voted for that account... and the account didnt do a vote....
Possible bug could someone confirm the problem in base code!!!
// Marlark<
Marlark
09 October 2002, 16:26


Hi Davio i can confirm the above problem!!!!
I tested on your Demo Site and it do exact same thing there !!!
// Marlark<
VodkaFish
09 October 2002, 18:04


Davio - I d/led it and it looks great. Good readme file, I'm about to go do some coding smile A request: any code changes you make, if you could post them here (besides updating the files) since a bunch of us probably can't write over the files. Thanx a lot smile<
Davio
09 October 2002, 18:33


Originally posted by Marlark
Hi Davio

I added the poll code to my site and it seamed to work very good until i noticed that if you have a poll and instead of pressing vote you do a View Results it gets marked voted for that account... and the account didnt do a vote....
Possible bug could someone confirm the problem in base code!!!
// Marlark
When you press the "Vote Results" button, it logs it as an anonymous vote. It's like an empty vote. It is not counted. This prevents users from seeing the poll results before they vote. But still allows them to view the results, even if they don't want to participate in the poll.
Thanks guys for the compliments. Glad to see you install it without any errors.<
Raziel
09 October 2002, 20:27


Thanks guys for the compliments. Glad to see you install it without any errors.

Well, you said it... bigsmile
Compliments, you have mine as well, however I have a problem.
I am running a Snitz 3.4.01 version of this forum, and tried to install it. It alle went well, and I made it to the Poll Configurations in the Admin area.
But when I tried to go into any of my forums I got the following message:

-------------------
Technical Information (for support personnel)

Error Type:
Microsoft VBScript compilation (0x800A03EA)
Syntax error
/My-forum/forum.asp, line 927
Function LastPostLink()


Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; Q312461; .NET CLR 1.0.3705)
-------------------

... please do help?<
sy
09 October 2002, 21:01


Thanks guys for the compliments. Glad to see you install it without any errors.

Well, you said it... bigsmile
Compliments, you have mine as well, however I have a problem.
I am running a Snitz 3.4.01 version of this forum, and tried to install it. It alle went well, and I made it to the Poll Configurations in the Admin area.
But when I tried to go into any of my forums I got the following message:

-------------------
Technical Information (for support personnel)

Error Type:
Microsoft VBScript compilation (0x800A03EA)
Syntax error
/My-forum/forum.asp, line 927
Function LastPostLink()


Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; Q312461; .NET CLR 1.0.3705)
-------------------

... please do help?

Why enter your errors here in this topic when Davio has clearly stated there are other areas to post requests for help?
It will make it less confusing both for Davio and other users when they come to search out an answer.
Quote Davio
If you have any problems please post them in the Help: MOD Implementation forum. DO NOT ASK FOR HELP OR POST YOUR ERROR MESSAGES IN THIS TOPIC!!
Can we keep this thread for suggestions and discussion of the features of this mod? (and of course praise for Davio's work smile)

Sy<
auditude
09 October 2002, 21:07


Great MOD.. had no problems getting it installed as prescribed!<
RichardKinser
09 October 2002, 21:32


sy,

I have often thought it would be best to lock topics in this forum, because any errors should only be discussed in the Help: MOD Implementation forum.<
favorini
09 October 2002, 23:43


Originally posted by Davio
When you press the "Vote Results" button, it logs it as an anonymous vote. It's like an empty vote. It is not counted. This prevents users from seeing the poll results before they vote. But still allows them to view the results, even if they don't want to participate in the poll.

I think I am missing something here. Users can't see results before they vote, but they may view results before participating. This seems contradictory. When you say participate are you referring to something other than voting?
-Fran
<
alex042
10 October 2002, 00:03


I think I am missing something here. Users can't see results before they vote, but they may view results before participating. This seems contradictory. When you say participate are you referring to something other than voting?

The way I understand it is if they view the poll results before they vote, they void their chance to vote. <
favorini
10 October 2002, 00:20


Originally posted by alex042 The way I understand it is if they view the poll results before they vote, they void their chance to vote.

Gotcha. This is a much clearer way to say this. smile Might want to update the feature list to this wording. Also, it would be nice to have a per poll option that says users may vote even after they view results. In fact, I'd be inclined to make this the default, but that's just me. I'm having trouble thinking of many cases where it really matters.
-Fran
<
Davio
10 October 2002, 00:47


Thanks Sy. smile<
ROB
10 October 2002, 01:43


Originally posted by favorini [brAlso, it would be nice to have a per poll option that says users may vote even after they view results. In fact, I'd be inclined to make this the default, but that's just me. I'm having trouble thinking of many cases where it really matters.
I agree. I would prefer to allow users to see the results before voting (if they're so inclined).<
Marlark
10 October 2002, 06:26


Got a future idea for you davio and that would be the option of doing lets say multiple choices on a poll lets say 2+ selections on a vote.

Lets say you have a poll that have 15 enties in it but you should be allowed to put 3 of the entries on your poll vote.
// Marlark<
MichaelA
10 October 2002, 08:04


Originally posted by favorini [brAlso, it would be nice to have a per poll option that says users may vote even after they view results. In fact, I'd be inclined to make this the default, but that's just me. I'm having trouble thinking of many cases where it really matters.
I agree. I would prefer to allow users to see the results before voting (if they're so inclined).

FYI

This was discussed in-depth before the MOD was released and the concensus was that people would be influenced by what they see, not what they feel. Kinda like going along with the group instead of voting what you think. So this was not a random choice by Davio. He followed the wishes of the majority. If there are good reasons to make a change, it should be an option set by the admin per poll, as I believe is being suggested.
Again, just to let you know the history of why the Poll MOD went this way.
Mike
<
Tmpj
10 October 2002, 09:13


Nice Work Davio!<
richfed
10 October 2002, 12:00


Had a little conflict with my previously installed Message Icons & Events MODs, but after a bit of struggle, all's working.
GREAT feature improvements, Davio! Thanks for the long hours!<
claus_mikkelsen
10 October 2002, 13:15


Hi
I havei nstalled your Poll Mod on my site. It seems that all files have been modyfied. But Where is the control, so that I can produce the actual polls... I mean: In which file did I miss something.
The only option I have got on my topic pages is to make new topics.. And when I hit that option it produces the normal form for writing a topic...
Best
Claus<
Airborne
10 October 2002, 13:54


Im having the same problem I see the poll settings in my admin menu and I have them turned on but still dont see the poll icon.
http://www.nchsfootball.com/snitz/
Any clues what I missed<
Bookie
10 October 2002, 14:15


Make sure you read the instructions very carefully to find out how to create polls. Hint: it has something to do with the forum properties.smile<
Raziel
10 October 2002, 14:17


Yeah Yeah... ease up guys... I'm sorry that I posted it inhere... - The Mod may delete it. I would have done it myself, but that would have been rude, now that you all have commented on it, and quoted... And of course, because I can't remember my password... hehe... so I can't delete my posts. I'm only able to write because of the cookies... bigsmile
But hey, Davio - Great Mod! I managed to work it out and It's working alright... !
A Job well done!<
Airborne
10 October 2002, 14:27


Bookie thanks I think I had read that thing about 40 times this morning and saw that everytime but for some reason wanted to go to admin opitions rather than forum properities.
thanks<
sy
10 October 2002, 19:31


Originally posted by Davio
Thanks Sy. smile

No worries, it doesn't seem to have worked though.. wink
Sy<
mark
10 October 2002, 20:33


I cant find the link where i can add poll... I installed and i didn't encounter any problem.. But i can't find the link to add poll in forum.asp and topic.asp.... Help...<
Bookie
10 October 2002, 20:39


Read the instructions carefully. I'll give you a hint: forum properties.smile<
RichardKinser
10 October 2002, 20:49


Originally posted by Davio:

SUPPORT: If you have any problems please post them in the Help: MOD Implementation forum. DO NOT ASK FOR HELP OR POST YOUR ERROR MESSAGES IN THIS TOPIC!!
<
Davio
10 October 2002, 22:03


Originally posted by Davio:

SUPPORT: If you have any problems please post them in the Help: MOD Implementation forum. DO NOT ASK FOR HELP OR POST YOUR ERROR MESSAGES IN THIS TOPIC!!
Geez!!
Richard I think that text needs to be bigger. I can bet they are going to miss your post still. I will enlarge it in my first post. They just never follow instructions. angry<
runnerblade
11 October 2002, 14:32


i m sorry. i delete my post.
thank


<
Rasco
11 October 2002, 15:41


Thanks Davio for updateing this Mod smile<
e3stone
11 October 2002, 16:23


Davio -

Good work on the mod smile I've been using your poll mods ever since I started using Snitz and I think it's one of the most usable mods out there. I remember one of the version where a user could only place 8 answer choices in the poll. I like it that this one can have 15 choice, but it still means that an admin would have to go in a add code, to the db and snitz code, if they wanted, say, 16 or 20 options. One of the options could be to have the following tables:

POLL POLL_ID (PK)
CAT_ID
FORUM_ID
TOPIC_ID
POLL_QUESTION
POLL_END_DATE

POLL_CHOICE POLL_CHOICE_ID (PK)
POLL_ID (PK)
POLL_CHOICE_TEXT
POLL_CHOICE_VOTECOUNT

POLL_VOTE POLL_CHOICE_ID (PK)
POLL_ID (PK)
MEMBER_ID (PK)

Of course, this example would make it where only members could vote, but then the admin/mod could not only see who voted, but what their vote choice was. This would also allow for unlimited voting choices for a poll.
Anyways, don't pay an attention to me. Your mod has always worked great, plus, how many people would have more than 15 poll choices in a poll? smile I just look at column names such as 'answer1' and 'count12' and think "there must be another way"

I've been really critical lately on database designs, and I appologize before-hand if I offend anyone. I don't mean for any of my comments to be taken personally or cast an opinion that someone's design isn't good. This is probably because I'm taking a DB design class right now and the prof has just been picking apart my database designs. Just trying to get ready for my test on Monday dead<
hawkman99
11 October 2002, 23:39


Excellent MOD Daviocool. It was well worth the wait, keep up the great work!
Steve<
Davio
12 October 2002, 09:15


e3stone, if you have any ideas to improve the database design for the poll mod, I'm all ears. No way am I saying that the design I have done is the best. I don't like the answer1, count 1, etc. but I don't know any other way to do it.<
Munkey
12 October 2002, 18:04


Thanks for putting the hard work and effort into a great mod.<
Davio
12 October 2002, 21:02


Thanks guys. Glad everyone likes it. smile<
juuso2
13 October 2002, 15:20


Excellent MOD Davio smile<
Davio
15 October 2002, 00:13


You guys say the mod is great, but only 2 users rated the mod at the SnitzBitz site. Has been downloaded 200 times and only 2 users rated the mod.
Must be because the mod isn't giving anybody trouble. Think I will put a small bug in there so I can get you guys to rate my mod more. bigsmile
Now go rate the mod that you guys say is an excellent and great mod:
http://www.snitzbitz.com/mods/details.asp?Version=All&mid=76
I am asking kindly of course. smile<
Davio
16 October 2002, 04:13


Poll Mod has been updated to fix a few small bugs. You can view more info in the first post of this topic.
Details of bugs found here: http://forum.snitz.com/forum/topic.asp?TOPIC_ID=36982<
Cliff
16 October 2002, 23:53


Great MOD, very easy to install.
Thank you.<
serverhacker
17 October 2002, 00:18


Thanks, Davio

Works great, thanks for all the work you did on this mod bigsmile
<
BDFFL
18 October 2002, 16:48


This was my first MOD attempt and it worked on the first try. Thanks for including detailed directions.<
Cliff
21 October 2002, 07:51


Davio,
I just voted on SnitzBitz. It's up to 326 downloads and 10 votes. smile<
night-red
21 October 2002, 09:14


CoolThinker
26 October 2002, 12:58


Had a little problem installing the poll mod, running 3.4.03 I tried to run the dbs_poll_mod.asp but it doesn't create the table FORUM_POLLS and FORUM_POLL_VOTES, it says that they already exist. I can create them manualy but I like to know if somebody else had the same problem.
BTW, this is a first install not a reinstall.<
CoolThinker
27 October 2002, 16:55


Nevermind.... I found the answer at another post.<
Rusty
28 October 2002, 17:27


Excellent MOD - but a short question:
Is it possible to display the voter turnout in percentage?
Any hints how to realize this are welcome wink<
Davio
28 October 2002, 20:26


Rusty, don't know what you mean by voter turnout?
Coolhinker, this is not a support topic or forum. I thought making the text bigger in the first post would have let users know not to ask for help in this topic?<
BWJM
28 October 2002, 23:22


I think he might mean the percentage of members who have participated in the poll/vote. Eg: If the forum has 600 members and 60 vote, there would be a 10% voter turnout.<
Rusty
29 October 2002, 04:06


BWJM: exactly smile<
@tomic
05 November 2002, 19:22


You never said this wasn't for 3.1R4 Polls. Somehow I thought it was and unfortunately I have now lost 2 years of surveys, polls and votes. The discussion is still there at least which is usually more valuable than the poll results themselves.
@tomic<
Davio
06 November 2002, 03:01


You talking the upgrade part of the poll? Yeah it will only upgrade your polls from the 3.3 version. SR4 is too outdated for me to support.<
@tomic
06 November 2002, 03:25


You might want to add that to the readme.
@tomic<
Jeepers Ron
10 November 2002, 09:59


Will this poll work with Snitz Forums 2000 Version 3.3.03, I not is there one that will?<
Davio
11 November 2002, 00:21


No, this will not work with 3.3.03. Email me and I will send you the link for the old verasion.<
BWJM
11 November 2002, 22:08


Davio, question for you... Does this mod allow for a poll to be "open" but the thread locked so that members can vote but comments can not be posted (ie: replies made)? When I lock the thread, the poll is locked too. Any way around this?
Thx<
Davio
12 November 2002, 01:42


BWJM, nope I'm sorry.
But if you are willing to try, it's just the topic.asp file that you need to edit to get what you want to do. Topic.asp checks the topic status to see if it is locked, and displays the results or the answers accordingly. The code would be in the GetFirst() sub.
If you need help with it just start a new topic in the MOD: Help Imeplementation forum.<
Arne2
12 November 2002, 12:40


Really nice work. I just implimented it on Snitz 3.4.01 and it went well; with a little bit thinking and even a little bit more thinking since it collided with the MOD Smile Manager 3.4 which I use. Now I am waiting to see if anything unexpected happens bigsmile but so far everything seems to work well smile<
Doughnut
21 November 2002, 10:58


Davio!
You deserve a medal for this one mate, excellent <
Davio
23 November 2002, 01:24


Thanks Doughnut. smile<
Imri
01 December 2002, 18:12


Can I use this mod with 4.0 beta 3<
Davio
02 December 2002, 16:27


If the instructions that come with the mod doesn't say you can use it with version 4.0, then you will have to make the necessary modifications for it to work with v4.0.<
mcain004
04 December 2002, 06:20


Is there any way an admin can find out who voted for what? For example if I have a poll asking people if they will be attending a christmas party I would like to know who is selecting yes,no or undecided. Thank you.<
Davio
04 December 2002, 18:07


You can't with this mod. The voting is anonymous meaning no one knows who voted for what.

You would need to do some extra coding and database modifications to store which option each user voted on then display that data.<
mcain004
05 December 2002, 07:16


Thanks Davio.<
MichaelA
07 December 2002, 00:38


Originally posted by mcain004
Is there any way an admin can find out who voted for what? For example if I have a poll asking people if they will be attending a christmas party I would like to know who is selecting yes,no or undecided. Thank you.

Actually there kinda is a way already but it is a little risky if you don't know ASP. There is a MOD named WhoViewedThis that will show who viewed a topic. I believe, by voting and then viewing a topic, it should tell you who voted. But it may not be accurate as it will tell you who viewed a topic but may or may not have voted. I have it installed and that is how I tell who has viewed important topics. Not accurate but works for me. Might work for you. Do a search for the name. The risky part is that the author refuses to support it. If you know ASP then it shouldn't be a problem. I had a problem (as did several others) and the author never fixed it. I finally got it working for my site.
Mike
<
Davio
24 December 2002, 13:05


The poll mod has been updated. Just fixed a bug with the featured poll table on the default.asp page. One of the table borders of the table were not showing, due to some incorrect colspans for the table.
I am also working on a new page for users to put thier featured poll on the front page of thier site, outside of thier forum. It seems that using the included inc_poll.asp file is too tedious to get to work, especially for seasoned programmers like myself.
As usual I will need the opinions of some of the poll mod fans. I am giving the Site Poll (that's what I am calling it) it's own admin options (can turn it on or off, along with other features I will think up of). It will be similar to the way the featured poll is displayed and functions in the forum. Anyone has any thoughts on the Site Poll feature?<
gareth_moore_2000
26 December 2002, 10:42


I just installed this mod, its great BTw ! bigsmile
However, when I go to edit the poll/topic, it does not come up with the options then then comes up with an error message in post_info.asp

Microsoft VBScript runtime error '800a000d'

Type mismatch: 'cint'

/forum/post_info.asp, line 460



I saw that this was fixed in the latest version, however I already run on the letest version !
Any help ?!
<
Davio
26 December 2002, 17:16


Any help ?!
You won't get any until you read my first post...the one in the really big letters.<
byoung
26 December 2002, 19:12


Hey Davio,

Does the poll only support one question?
Barry<
Davio
27 December 2002, 00:31


umm, I don't understand what you mean.
You can hold as many questions in a poll as the message box can hold. You just have a maximum of 15 answers to a poll. You can create more than one poll if you wish.<
skyhawks
30 December 2002, 20:35


Hey Davio,

hows the new version of the Poll coming along??
sky<
Davio
31 December 2002, 10:50


It's ok. I have decided to change around some things the more I work on it. I am going to release it as a poll mod add-on and not include it with the original poll mod. Not everyone will want it.
Also decided not to store the site poll variables in application variables. Too many application variables isn't good. So I'm getting them directly from the database instead.
Soon be ready for beta testing. And I guess you will be the lucky beta tester before I release it.<
skyhawks
31 December 2002, 11:52


kool.. thanks. and happy new year to you. if you going to get caught, dont drink and drive.<
Davio
02 January 2003, 17:33


Ok, the Site Poll Add-on is ready for beta testing. skyhawks, I will email you the details. In the meantime please register over at my forums as that's where I will be conducting the beta testing.<
Davio
04 January 2003, 16:35


Poll Mod has been updated. Please see the first post in this topic for more details.<
jkmcgrath
04 January 2003, 20:09


Hey Davio thanks for the updates!
If I undertand the readme/history correctly

Poll Mod History:
Version 2.0.3
- Added admin option turn enable/disable users to view poll results before they vote. - Fixed bug when admin locked a Category/Forum/Topic the poll will automatically be locked too. Each poll will have to be locked individually. - Modified files: topic.asp, admin_poll.asp, config.asp


I can just update my current topic and config files and replace the old with the new? (current ver 2.01

THanks John<
Davio
04 January 2003, 21:54


You will need to update your inc_poll.asp file too from the original poll mod file. That was the only file updated from 2.0.1 to 2.0.2.<
skyhawks
05 January 2003, 02:35


hey Davio, just wwanted to say thanks alot for making this happen. I was wondering. the file I got from you the other day to do the test. is it the same as the one that is available to everyone now?? anyword, do i need to update my files too?<
Davio
05 January 2003, 06:00


Yes, you would have to update your files too. Or you could wait until I release the site poll mod in a little while. I haven't heard anything from my second beta tester. (There was 2 of you testing it) I will email him and see what's up. If he gives the ok, i will release it. Shouldn' be too long.<
richfed
05 January 2003, 15:00


Originally posted by Davio
Poll Mod has been updated. Please see the first post in this topic for more details.

Thanks, Davio ... just upgraded [easy!] to 2.0.3. Excellent! That "allow users to peek AND vote" feature was just what I wanted. Great mod, as always, just got better! <
jkmcgrath
05 January 2003, 15:22


For some reason my active polls dont show new polls that I create after the update?<
Davio
05 January 2003, 18:34


jkmcgrath, the polls have to have at least 1 vote before they show up on the active polls page.<
Davio
07 January 2003, 00:03


Ok, the recent update I made to the mod to allow users to view the results before voting, doesn't exactly work corectly. This allows users to vote over and over and over again.
I will post another update soon. Sorry about that.<
Davio
07 January 2003, 12:41


Poll Mod has been updated once more. See first post for more details.<
MarkJH
07 January 2003, 13:19


Thanks Davio, seems to work fine on my test site. smile
Looking forward to this Site Poll immensely. I'm actually working on my index.asp right now and i'm struggling for simple to update content... this'll be just the ticket! Will it be fully customisable, so that it can represent the look and feel of the page it's displayed on as opposed to the look of the forum?<
skyhawks
07 January 2003, 20:41


Thanks Davio, the updated Mod works well now. I was wondering when will the site poll be ready?? my poll mod still have the beta code in there.... let me know when its final and if i will need to do anything with my code.

Thanks Again. You ROCK!!! sky<
Davio
08 January 2003, 11:19


Uhmm, the site poll mod is actually ready, (2 days ago) but I was waiting on one of my beta testers. But I will release it today.
Mark, what kind of person would make a site poll mod without being able to customize it? bigsmile The only little problem I would have is, when you select the "Open poll in new window" feature, it uses the pop_poll.asp file from the forum, which uses forum colors. So I don't know if that's going to be a big problem for users. But I guess I will hear the response after I release it. smile<
Davio
08 January 2003, 12:16


Site Poll Mod is released here: http://forum.snitz.com/forum/topic.asp?TOPIC_ID=40335<
MarkJH
08 January 2003, 12:23


Mark, what kind of person would make a site poll mod without being able to customize it? bigsmile

Hopefully, not you! bigsmile
Look forward to seeing the MOD... as to the pop_poll.asp file, I guess we could make a copy of it and rename it say, pop_sitepoll.asp and hardcode the colours in there? Anyway, I guess I shouldn't discuss this here. smile<
MarcelG
15 January 2003, 11:18


removed : wrong topic...sorry<
Davio
15 January 2003, 11:42


This is not a support forum. Read the readme file or read the first post in this topic to see where to get help for this mod.<
pknaz
13 February 2003, 14:43


Thanks for a great mod Davio. Do you have any plans to implement a experation time for a poll? This would be used to restrict users from voting after a designated time period.<
Davio
13 February 2003, 22:29


I don't have any plans on the poll mod. Everyone seems to be satisfied where it is now. smile
Is that something that everyone would want? I would like to add a new feature only if users would want it. Not just for one user.<
Diogo
25 February 2003, 11:12


I found a bug in the code:

I'm using diferent names for the Forum Tables. And because of it, this line:

Code:
strSql = "INSERT INTO " & strMemberTablePrefix & "POLL_VOTES (GUEST_VOTE, MEMBER_ID, TOPIC_ID, FORUM_ID, CAT_ID)" & _

in the Sub UpdateVote, file inc_func_common.asp, should be:

Code:
strSql = "INSERT INTO " & strTablePrefix & "POLL_VOTES (GUEST_VOTE, MEMBER_ID, TOPIC_ID, FORUM_ID, CAT_ID)" & _


Great MOD, just love it! Thanks Davio!
I try to think of anything else that it could have, but I think it is just perfect.<
Davio
25 February 2003, 11:23


Thanks Diogo, I will look into.<
imran
03 March 2003, 05:42


I have few problmes with this Poll Mod, I have checked everything but still I am getting this error.

rsTopic.open strSql, my_Conn, adOpenForwardOnly, adLockReadOnly, adCmdText

What should I do?<
Davio
03 March 2003, 07:45


SUPPORT:
If you have any problems please post them in the Help: MOD Implementation forum. DO NOT ASK FOR HELP OR POST YOUR ERROR MESSAGES IN THIS TOPIC!!<
Mr Pink
26 March 2003, 07:59


One small question. Is this the Poll Mod that is currently being used on this web site?<
© 2000-2021 Snitz™ Communications